ic-a25ne_ic-a25ce.pdf (749.8 kB)
For expanded communication coverage, output power has been increased to approximately 6 W typical (PEP)/ 1.8 W typical (carrier) compared to the IC-A24E (5/1.5 W PEP/carrier).
* Photo is of the IC-A25NE.Often used functions are assigned to the keypad and you can directly access a desired function. The enlarged flat sheet keypad offers smooth and swift operation.
Night mode screen
Menu screenThe 2.3 inch large, high contrast and high visible LCD displays user-friendly, graphic screens and ensures good readability under direct sunlight. The operating frequency in large characters can be recognized at a glance. In addition, the night mode option enables easy viewing in low light conditions.
Recall channel screenThe IC-A25NE/CE stores the last 10 channels used. You can easily recall those channels by using the directional keys, the channel knoband the 10 keypad. This is convenient for switching between several channels, such as NAV and COM channels. In addition, you can freely edit (replace, delete, change order) the stored recall channels.
A third-party wireless Bluetooth® headset, like a 3M™ Peltor™ WS™ 5*, provides convenient hands-free operation. Also, by using the optional VS-3 Bluetooth® headset, the side tone function can be used.
* Compatibility not guaranteed.
information screenThe supplied BP-288, 2350 mAh typical intelligent battery pack, provides up to 10.5 hours* of operating time. You can check the condition of the battery pack in the battery status screen. It is very useful for optimum charging and battery health maintenance.
* Typical operation with Tx: Rx (Max.audio): standby=5:5:90. (Bluetooth OFF, GPS ON)
VOR screenThe CDI (Course Deviation Indicator) is detailed like a real VOR instrument, and displays any deviation from your course.
The OBS (Omni Bearing Selector) enables you to change course from the original flight plan.
The TO-FROM indicator shows the position relationship between your aircraft and the course selected by the OBS.
The ABSS (Automatic Bearing Set System) function enables you to set the current course as a new course in two simple steps.
Near station search
function screenThe near station search function assists you in accessing nearby ground stations. The function searches for nearby stations using the station memories that have GPS position information. To use the near station search function, position data and frequencies of the ground stations must be programmed.
Waypoint NAV screenThe simplified waypoint NAV guides you to a destination by using current position information from GPS (also GLONASS and SBAS). The waypoint NAV has two functions: Direct-To NAV and Flight Plan NAV. Up to 10 flight plans and 300 waypoints can be memorized in the IC-A25NE.
RS-AERO1I map screen
©2017 Google-Map data
©2017 GoogleUsing the RS-AERO1A (Android) or RS-AERO1I (iOS) application, you can make flight plans on an Android/iOS device and import the plan into the IC-A25NE via Bluetooth. The following four functions are available: Create a flight plan, set Direct-To NAV, display flight plan information and display waypoint information.
* Additional certification may be required for some countries. Enquire with your local authority for details.
|NAV and COM||NAV and COM channels||COM channels|
|Frequency range||Tx||118.000–136.992 MHz|
|Rx||108.000–136.992 MHz||118.000–136.992 MHz|
|Number of memory channels||300 channels/15 groups|
|Channel spacing||25/8.33 kHz|
|Type of emission||6K80A3E, 5K00A3E|
|Power supply requirement||7.2 V DC (BP-288), 11.0 V DC (External DC Jack)|
|Current drain (approximately)||Tx High||Less than 1.8 A|
|Rx Max. audio/Stand-by||Less than 500 mA|
90 mA typ. (GPS, Bluetooth, Light: OFF)
|Antenna impedance||50 Ω|
|Operating temperature range||−20 °C to +55 °C|
(W × H × D;)
(Projections not included)
|58.9 × 148.4 × 31.8 mm|
|Weight (approximately)||340 g (with BP-288)|
|Output power (at 7.2 V DC)||6.0/1.8 W (PEP/carrier)|
|Audio harmonic distortion||Less than 10% (at 85% modulation)|
|Harmonics Spurious emissions||Less than −36 dBm|
(except operationg frequency ±1 MHz)
|Frequency stability||±1 ppm|
|Intermediate frequencies||46.35 MHz/450 kHz (1st/2nd)|
(6 dB S/N)
|Less than 0 dBμ|
(12 dB SINAD)
|Less than 0 dBμ (with CCITT filter)|
|Squelch sensitivity (at threshold)||Less than 0 dBμ|
|Adjacent channel rejection||More than 60 dB|
|Spurious response||More than 70 dB|
|Hum and noise||More than 40 dB (at 90% modulation)|
|Audio output power||More than 350 mW typ.|
(8 Ω load/60% modulation at 10% distortion)
|Ext. speaker connector||3-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω|
Measurements made in accordance with EN300 676-2.
All stated specifications are subject to change without notice or obligation.
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
|Low Pressure||500.5||I, II|
|High Temperature||501.5||I, II|
|Low Temperature||502.5||I, II|
|Rain Blowing/Drip||506.5||I, III|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
|Ingress Protection Standard|
|Dust & Water||IP57 (Dust-protection and Waterproof* protection)|
* One meter depth for 30 minutes.
Some functions and options will be available in the future.